Resources

Type 1 ultrapure water is so pure that it is actually corrosive to some materials. This is because ultrapure water has an extremely high resistivity (typically 18.2 megohm-cm at 25°C) and lacks any dissolved ions, which means it has a strong tendency to absorb ions and impurities from any material it comes into contact with. […]

Short answer, type 1 water is purer than type 2, but there is a lot more to take into consideration before specifying one. As the use of instruments requiring specific qualities of water increases, laboratories are moving away from the traditional Type 1, 2, and 3 specifications and toward a set of guidelines which are […]

The purity of water is a crucial factor in many different applications, particularly in healthcare. Medical devices and medicines must be wholly safe and effective to use, which means that keeping water free from impurities is essential. To achieve this essential goal, laboratories must adhere to strict rules set by the TGA and CLSI. One […]

Both PP (Polypropylene) and HDPE (High-Density Polyethylene) are commonly used for processing DI (Deionized) water, but which one is better depends on the specific application and requirements. PP is known for its excellent chemical resistance and is often used in applications that require high purity, such as laboratory and medical equipment, as well as in […]

A reliable supply of pure water in a lab can be a challenge. You need consistency day in day out, often 24 hours a day. Here at Purific we get it, and we really do care. For the last 30 years we have been supporting labs with their pure water needs. So when you ask, […]

Tucked away on the stunning Mornington Peninsular in VIC this old Purific Mini was just replaced …with a new Purific. The mini was installed back in 2005 and served many years. However with a new Analyser on its way requiring more water, Purific was once again given the opportunity to supply a system that would […]

This Purific system was installed last week and is supplying a Siemens Atellica CM and IM in a growing laboratory in Kew, VIC,

Is it crucial that you have a reliable supply of pure or ultra-pure water in your laboratory? During a recently yearly service of the Purific system pictured below, we found that it had been installed in 1998 and has been in operation ever since. That’s 24 years of service and counting. We are passionate about […]